Rules to keep in mind when working with flexible display
Flexible display is an exciting new technology that is now spreading the word. However, most of us use them daily without following the corresponding rules. While flexible displays are great for mobile devices and other applications, you can speed up their damage if you don’t learn how to protect your screen. So we should follow some simple rules.
Do not apply excessive bending or twisting forces to the flexible display！
It must be remembered that flexible displays are not as durable as rigid displays. Apply only moderate bending and twisting forces to the show. Do not drop or vibrate it, or you may damage internal components. Also, never apply excessive bending or twisting forces to a flexible display, even if you think it’s “flexible enough.” To avoid damaging the screen: Avoid dropping it on a hard surface. This may cause permanent damage to the internal components of the device and may also cause performance degradation over time!
Avoid sudden shock or drop from affecting the flexible display!
When working with flexible displays, it is critical to avoid popping or bubbles. Sudden vibrations may crack or damage the screen. For flexible displays to stay in good shape, they must be protected from extreme temperatures and sudden vibrations or drops. Avoid leaving any other electronic equipment outside during hot weather! Likewise, let’s say someone in transit must be protected from accidental scratches and damage from falling objects hitting them directly.
Protect flexible displays from extreme temperatures！
You may have heard the term “thermal runaway,” a process that causes a device to overheat and eventually fail. If your flexible display is exposed to direct sunlight for an extended period, it may get hot enough to cause a thermal runaway. This means your flexible display will be irreparably damaged. You should also avoid leaving flexible displays in hot places like cars or ovens – even if turned off! The same goes for placing it near a heat source like a radiator or space heater.
Please don’t leave it in direct sunlight for extended periods！
While the flexible screen is designed to be durable, it is still prone to damage. It would be best if you never forgot that the display is not as strong as a glass one and should be handled carefully. The most important thing you can do for your flexible display is protect it from dust and humidity. If you live in an area where there are lots of airborne particles or high levels of moisture in the air, consider using a case with a built-in filter that will keep your phone clean while protecting its delicate surface at the same time. You should also ensure that when you’re using your phone outdoors, you don’t leave it out in direct sunlight for too long–the intense heat can damage both screens.
The flexible display should be protected against mechanical damage！
Flexible displays are more fragile and prone to damage than other display types. Therefore, extra precautions should be taken when handling them. If the flexible display is cracked or cracked, the entire screen may need to be replaced. This can be very expensive! Avoid dropping the device on hard surfaces such as concrete or tile floors, as sharp objects underneath could puncture the phone’s screen. Avoid twisting or bending your phone excessively; this can cause permanent damage over time, leading to cracks in delicate areas, such as the edge where two pieces join. It also increases stress points on the glass substrate, which can lead to failure under high load conditions.
The final point is that we all must learn to protect our flexible displays and ensure they can be used safely. Avoid these dire situations. Otherwise, you will go into the process of constant replacement and repair. This will waste too much time and energy, and only when it is well protected can it play its most significant role!